PDA

View Full Version : D60 Axelshafts>>>>

Burt4x4
03-01-2007, 07:32 PM
How do you get D60 shafts to use Full-circle Ujoint clips?

WIth my D44 I needed new shafts....
Shaggy
03-01-2007, 08:41 PM
New shafts or grinder, I assume...
jays68yak
03-01-2007, 08:45 PM
New shafts or grinder, I assume...

correct from what I understand.
FRIZZLEFRY
03-01-2007, 09:09 PM
I used to use a grinder which works well and I get the snaprings at Ace hardware.Now I just stick the Spicer 35 spline outers in the mill.The Yukons inners I run come already done :thumb:
Burt4x4
03-01-2007, 09:56 PM
I used to use a grinder which works well and I get the snaprings at Ace hardware.Now I just stick the Spicer 35 spline outers in the mill.The Yukons inners I run come already done :thumb:
Mr. Machine Shop :pimp2:
Are Yukons CMoly?
What about the Spicer axels you see for sale on ORD's website..anyone know if they are fullcircle?
Nosmog73
03-01-2007, 10:07 PM
If they are 30 spline outters they are not full circle clips...but can be done using a dremel and about 15 min of grinding..

If /when you open the u-joint box and snap them on you can see what area you need to grind out to make them full circle.. :2thumbs: