14FF parts

[Burt4x4]

Looking for spring plates & ubolts for a 14FF :unsure:

[jays68yak]

junk yard. :2thumbs:

[Burt4x4]

You mean you went to the junkyard and scored them for me? ahhh thanks Jay!

hehehehe

I haven't been to a junkyard in years..gave up on them cuz you can hardly ever find firstgens...but now I guess I'm difffeerent :chaz:

[jays68yak]

I know there is a truck in the newark yard that doesnt have a bed on it and a half taken apart 14bff.

[Burt4x4]

I don't know were any yards are nowa days...back in the 90s I use to go to the hayward yards alot..over by the SanMateo bridge when I lived in Freakmont..I think Modesto has a Junkyard??
DIY4X has plates for 40bucks :unsure:

[jays68yak]

unless you pay for faster shipping, it will be a week before you have the parts.

Did you ask Dillion if he had anything?

[Burt4x4]

No I haven't spoke to Dillon sence I picked up yer engine. Good call though he may have what I need... :unsure:
I do need to keep the expensise low for the rest of this build...I plan on getting the new beefy hardware down the road but for now I just gotta get it rolling again so I can start working out the kinks and have a rig to wheel in Pismo..

[Shaggy]

Not sure if a 14sf uses the same plates and u-bolts, but if it does then the 74 in my garage has what you need and you're welcome to it. Just needs to be pulled off of it. :uh oh:

[Burt4x4]

Cool Shag!
I don't know if they are the same tube size but I would guess they are and the SF to FF difference is just the outers :unsure: :unsure:
Maybe someone here knows?

[jays68yak]

yes they are the same tube size. And the yokes are the same too.

[Burt4x4]

Thanks Jay
I will get back to you on your offer Shag! Thanks!

[Nosmog73]

shipping is fast and good stuff too..

http://www.ruffstuffspecialties.com/catalog/ubolts-plates-c-15.html?osCsid=20405c984e51ae326130006929163d14

:2thumbs:

[jays68yak]

shipping is fast and good stuff too..

http://www.ruffstuffspecialties.com/catalog/ubolts-plates-c-15.html?osCsid=20405c984e51ae326130006929163d14

:2thumbs:

Werd! He is good peeps.

[Twisted Whipz]

burt, come to Dillon's pick n pull back yard yo

open most nights and weekends

:crazy: :crazy: :crazy: :crazy: :crazy: :crazy: :crazy:

[Esteban86K5]

What's wrong with the ones that came with the axle? :blink:

[k5LS2]

I prolly got em on a shelf out back buried, Ill look tomorrow for ya burt :beer:

[Burt4x4]

What's wrong with the ones that came with the axle? :blink:
Well I guess someone ransacked the box that came with them before I had a chance to secure them..who knows what else is missing? That place you took them too has some real shaddy people hangin out there :blink: :toothless: :box:

hehehehe Just messin PacFab :p :p :pimp2: :pimp2:

[Burt4x4]

I prolly got em on a shelf out back buried, Ill look tomorrow for ya burt :beer:
Cool! Just bring them with you when you come out to finnish up my build :D :pimp2: :fear: :2guns: :rotflmao: :drunk: :smoke: :patriotic: :praise: :manboobs2:

[PaloAltoK5]

What's wrong with the ones that came with the axle? :blink:
Well I guess someone ransacked the box that came with them before I had a chance to secure them..who knows what else is missing? That place you took them too has some real shaddy people hangin out there :blink: :toothless: :box:

Hey, I resemble that remark!! :toothless: :drunk:

[bggrnchvy]

3.5" tubes or 3-3/8" tubes? Ive got a set of 4 new 3.5" u-bolts from 5/8" stock in the garage somewhere.

[Twisted Whipz]

3.5" is for the newer 14bolts ie. 88-present

[Twisted Whipz]

so whats the big idea burt. get my hopes all up and no see you. i guess i'll have to be more assertive and try and get over to lend the assist on the new project

[Burt4x4]

YA! I waited for you ALL day on Saturday :p
hehehe

[Burt4x4]

I have to get the perches off and then weldum back on still...

[PaloAltoK5]

YA! I waited for you ALL day on Saturday :p
hehehe

My wife and I went to Dunes beach in Half Moon Bay, took my brushless E-Maxx. Nothing like roostering the dogs that can't keep up!! :thumb: