PDA

View Full Version : Spring plates

gr8pumkin
02-12-2006, 01:47 AM
Hey I need a set of 14ff spring plates and a set of dana 60 spring perches.

I'll call you on monday.

Jeremy
Nosmog73
02-12-2006, 02:49 AM
Hey I need a set of 14ff spring plates and a set of dana 60 spring perches.

I'll call you on monday.

Jeremy

You mean spring plates or the perch on the drivers side...Passenger side is cast into the housing.. :2thumbs:

I just made an order from kert too...but you will have to wait to see it :2thumbs:
UseYourBlinker
02-12-2006, 03:28 AM
It's so funny how everyone spells Kert's name wrong.

I have a list also... :pimp2:
gr8pumkin
02-12-2006, 07:01 AM
I was just talking about the quarter inch steal plates which three u-bolts run throught and one set of bolts which go into the housing either way they both sit on top of the leaf springs and it hold the springs down :2thumbs: And the other has four u-bolts and a slot in the middle for the axle to be moved forward or back.
gr8pumkin
02-12-2006, 07:01 AM
I was just talking about the quarter inch steal plates which three u-bolts run throught and one set of bolts which go into the housing either way they both sit on top of the leaf springs and it hold the springs down :2thumbs: And the other has four u-bolts and a slot in the middle for the axle to be moved forward or back.
Nosmog73
02-12-2006, 08:43 AM
These...

http://i16.photobucket.com/albums/b29/mikee_95242/MVC-020S.jpg :2thumbs: :2thumbs: :2thumbs:
gr8pumkin
02-13-2006, 02:03 AM
Yes!!!! THem are the thingys I was talkin bout :beer:
4X4HIGH
02-13-2006, 02:20 AM
why not just use a set of stock spring plates and drill a new hole if you're moving the axle? I have an extra set of factory 14ff spring plates if you want them and i can even drill the hole for you. I did this with my 14ff when i moved the axle back 1.5"
UseYourBlinker
02-13-2006, 02:48 AM
Scott also drills stock 10 bolt spring plates... :2thumbs:
gr8pumkin
02-13-2006, 04:56 AM
These aren't for me there for someone else, who wanted them. So I'm placing the order and having them shipped to my place. mkay


Hey scotty don't worry I'll be swinging by your place soon enough :2thumbs:

Jeremy
cybrfire
02-15-2006, 03:15 AM
Sounds cool. I'll be at the shop number.
Nosmog73
02-15-2006, 12:01 PM
Sounds cool. I'll be at the shop number.

Hey Kert did you get my order... :2thumbs:

And you have a pm too..