High steer

[gr8pumkin]

Okay so I'm finally putting my high steer on my 60, I have one problem, that problem is the ball joint type end on the passenger side of the tie rod won't seat down into the tappered hole enough to get a the cotter pin in the hole. I've tried using a socket and a pipe wrench to get it tight enough to slide the cotter pin in but that wasn't even close to happening. I had no trouble on the drivers side but the passenger side just won't slide down the tappered hole enough. Am I doing something wrong? Any help would be appriciated.

Thanks

[4X4HIGH]

Sounds like the tapered hole is the wrong size.

[gr8pumkin]

That's what I was thinking but I didn't want say that.... I'll call trevor tommorow. :crazy:

[Nosmog73]

Did you get the 2 that look the same (black short threaded ones) Part number 2010R for the passenger side...

If it wont go all the way in then Scott is right..

Like this right..

http://www.norcalbigdawgs.net/Gallery/albums/album107/MVC_054S.jpg

[gr8pumkin]

Thanks mike, I got that pic sent to my phone today, And thats the way I have it set up but I talked to trevor and he gave me a few things to try...So we'll see how it goes.

Jeremy

[Nosmog73]

Mine was real TIGHT to seat all the way as needed to...Just enough to get the cotter pin in and no more...lol :2thumbs:

[gr8pumkin]

After talking with trevor I checked the castle nut and bingo everything works titties!!!!!!!

:beer: