PDA

View Full Version : Tips-TPI

Nosmog73
10-30-2005, 03:41 AM
Any tips ...Kevin Ryanb on the first turn over on the TPI..anything that might not be in the instuctions that came with the wiring..going to fire it up tommorow... :beer:
10-30-2005, 05:14 AM
Adjust the tps sensor ~ .54 volts.
Check the fuel pressure at the rail.
Remember to unplug the EST connector, then start the engine when you set the base timing. Then turn off the engine and plug it back in.

After you get it going, jumper the A to B terminal on the ALDL and see if you're trouble code free. :2thumbs:
Ryan B.
10-30-2005, 05:16 AM
forgot to log in. :flipoff2:
4X4HIGH
10-30-2005, 05:22 AM
Adjust the tps sensor ~ .54 volts.
Check the fuel pressure at the rail.
Remember to unplug the EST connector, then start the engine when you set the base timing. Then turn off the engine and plug it back in.

After you get it going, jumper the A to B terminal on the ALDL and see if you're trouble code free. :2thumbs:

Just make sure you DON'T start the engine with the terminals jumped or you could blow the ECM.